Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
IKO Gutter Replacement: The Jacksonville Owner’s Guide
IKO gutter replacement in Jacksonville typically runs $8 to $14 per linear foot installed for standard 5-inch aluminum K-style gutter, which means most single-story homes land between $1,100 and $2,400 for a full replacement. We stock IKO-compatible gutter profiles and hangers on our trucks, so a full gutter swap can often be completed same-day once we’ve measured your roofline. Homeowners usually catch the problem when they see water spilling over the front edge during a Jacksonville afternoon downpour, or when a section of gutter pulls away from the fascia after a windy week near the St. Johns.
Erik Lindgren and our crew at Birchbark Roofing Jacksonville have replaced IKO gutter systems on homes from Riverside to San Marco, and the failure pattern is consistent: the gutter itself rarely fails. It’s the hangers, the joints, and the pitch. More on that below.
Key Takeaways:
- Most Jacksonville IKO gutter replacements cost $1,100 – $2,400 installed, depending on linear footage and story height.
- Sagging, overflow, and pulled-away sections are the most common reasons homeowners call us.
- We install standard 5-inch and oversized 6-inch profiles, with hidden-hanger systems that hold up better in Florida wind-driven rain.
- You’ll have a written price before any work starts. No revisions, no surprise line items at the end.
Which IKO Models This Applies To
IKO doesn’t manufacture its own gutters directly for the U.S. residential market. What homeowners mean by “IKO gutter replacement” is almost always the gutter system installed alongside IKO roofing products, typically IKO Cambridge, Dynasty, or Nordic shingles, or the IKO roof edge and drip components that integrate with the gutter line. That said, we work with IKO-compatible profiles every week, and the compatibility question comes down to three things: the gutter profile (K-style is standard on Jacksonville homes; half-round shows up on older Riverdale and San Marco properties), the width (5-inch handles most Florida rainfall, but 6-inch is worth considering if your IKO roof has steep pitches that dump water fast), and the hanger type.
The gotcha we see in Jacksonville: hidden hangers installed too far apart. Florida’s afternoon thunderstorms dump water in bursts, and a 5-inch gutter with hangers spaced every 32 inches will flex and pull screws loose over time. We use interior hidden hangers spaced no more than 24 inches on our IKO-compatible installs, which is a spec detail that extends gutter life measurably in this climate. If you’re replacing gutters on a home with IKO shingles, we also re-seat and reseal the drip edge where gutter and roof meet, because that seam is where Jacksonville’s humidity and rain do the most damage.
OEM replacement parts for IKO-branded drip edge and flashing are straightforward for us to source. For the gutters themselves, we install quality aluminum profiles that match or exceed the gauge on what was originally hung. You don’t need “IKO gutters” specifically. You need a gutter system sized and hung correctly for your roofline and for Florida weather. That’s the part we handle.
Styles & brands we work with






Signs Your IKO Gutter Replacement Is Failing
- Water pouring over the front lip during heavy rain. This usually means the gutter pitch has flattened out or the profile is undersized for the roof slope. In Jacksonville’s storm season, a 5-inch gutter on a steep IKO roof can overflow in under ten minutes of hard rain.
- Visible sagging or gutter sections pulling away from the fascia. Hidden hangers have pulled loose from the wood, often because the screws were driven into rotten fascia or spaced too far apart. Once a section drops, every downpour makes it worse.
- Seam separation or drips at the corners and end caps. The sealant IKO installers typically use breaks down under Florida heat and UV exposure in about four to six years. Once a seam leaks, it drips against the fascia and starts wood rot behind the gutter.
- Staining or mildew streaks down the exterior wall below the gutter line. That means water is running behind the gutter or over the back edge, not through it. The damage is happening to the fascia and the wall, even if the gutter looks fine from the ground.
- Pooling water near the foundation after rain. The downspout is likely clogged, disconnected, or undersized. Jacksonville’s sandy soil drains well, so standing water means the gutter system isn’t routing water away from the house.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
The pricing table below reflects what we typically see across Jacksonville, from Ortega to Arlington. Your exact number depends on linear footage, whether we’re replacing fascia board behind the gutters, and how many downspouts your roof needs. You’ll get a written line-item price before any work starts. That’s not a negotiation point, it’s just how we do business.
| Replacement Component | Installed Price Range (Jacksonville) |
|---|---|
| 5-inch aluminum K-style gutter (per linear foot) | $8 – $11 |
| 6-inch aluminum K-style gutter (per linear foot) | $10 – $14 |
| Downspout replacement (per 10-foot section) | $90 – $150 |
| Fascia board repair/replacement (per 8-foot section) | $70 – $120 |
| Drip edge re-seating or replacement (per linear foot) | $5 – $9 |
Every gutter replacement includes removal and haul-away of the old material, hidden hanger installation at 24-inch spacing, seam sealing with a commercial-grade sealant, and a walkaround with you before we leave. Our 365-Day Done Right Promise applies: if something isn’t right within a year, we make it right. You’ll also get the Cedarwell Care Promise treatment, which means shoe covers at the door, drop cloths if we need to move through the house, and a photo of the completed clean-up before the crew pulls out of the driveway.
DIY or Call Us?
We’ll be straight with you: gutter replacement is one of the few home exterior jobs a handy homeowner can do. Single-story, simple roofline, easy ladder access. It’s tedious but not dangerous if you have the right ladder and you’re not near power lines. The problems we see with DIY work are consistent: seams sealed with silicone that fails in one season, hangers spaced too far apart, and downspouts pointing at the foundation because the pitch was eyeballed instead of measured.
Where DIY goes wrong in Jacksonville specifically is the heat. Aluminum gutters expand and contract dramatically between a July afternoon and a January night. If seams and hangers aren’t installed with that movement in mind, the system fails early. We install for the climate, not just the day you bought the materials.
If you’re on a two-story home, if any section of gutter runs within six feet of an electrical service line, or if your fascia shows signs of rot, call us. That’s not a sales line. Working two stories up on a ladder with a 20-foot section of gutter in Florida wind is how people end up in the ER. Call (904) 604-7914 and we’ll take care of it.
FAQs
In Jacksonville’s climate, a properly installed aluminum gutter system lasts 20 to 25 years. The limiting factors are seam sealant life and whether the fascia wood behind the gutters stays dry. Call (904) 604-7914 and we’ll assess what you have before recommending anything.
If the damage is one seam, one end cap, or a short section of sagging gutter, repair is usually possible. When gutters are old, losing their pitch, or pulling away in multiple spots, replacement often costs less than chasing individual fixes. We’ll tell you which is right for your house, in writing, before you commit.
A standard single-story home gutter replacement takes one day, including tear-off, installation, and clean-up. Two-story or complex rooflines may take a day and a half. We’ll confirm the timeline before we start. Call (904) 604-7914 for your estimate.
Yes. We carry 5-inch and 6-inch K-style aluminum profiles, hidden hangers, end caps, downspout sections, and elbows on our trucks. If your roof also has GAF, Owens Corning, or CertainTeed shingles, we stock compatible drip and flashing components for those brands too. Your estimate is free, and you’ll have the price in writing before we touch a shingle.
Birchbark Roofing Jacksonville is an independent local roofing contractor and is not affiliated with or endorsed by IKO Industries. We install and service gutter systems compatible with IKO roofing products and a range of other manufacturer materials.
If your IKO-compatible gutters are failing in Jacksonville, call (904) 604-7914 today. We’ll walk the roofline with you, explain exactly what’s happening, and hand you a written price before any work begins. No pressure, no surprises, no mess left behind.
Written by Erik Lindgren, Owner, Birchbark Roofing Jacksonville at Birchbark Roofing Jacksonville, serving Jacksonville and nearby areas.