Boral Roof Replacement Nationwide

Boral Roof Replacement in Jacksonville: What to Know First

Boral roof replacement in Jacksonville typically runs between $14,500 and $28,000 for a full tear-off on a 2,000-square-foot home, depending on the specific Boral line, roof pitch, and decking condition. Most Boral replacements take 3 to 5 working days once materials arrive. We are an independent Boral service provider, not an authorized dealer, which means we give you straight answers about what Boral products actually do on Florida roofs and what your replacement should cost. You’ll have the price in writing before we touch a shingle.

Call (904) 604-7914

This page is for Jacksonville homeowners who currently have a Boral roof or are considering Boral for a replacement and want to know what to expect from the work, the materials, and the bill. Call (904) 604-7914 for a free estimate and we’ll walk the roof with you before anything else happens.

How Boral Products Fail – and How We Fix Them

Boral makes a few distinct roofing lines, and each one ages differently in Jacksonville’s heat and humidity. Here’s what Erik Lindgren and our crews actually see on rooftops across town, and what we do about it.

• Boral Concrete Tile – surface spalling and color fade. Jacksonville gets intense UV exposure from March through October, and concrete tile coatings break down faster here than in drier climates. We see spalled tiles on homes in Mandarin and along the Intracoastal within 15 to 18 years of install. The fix is a full replacement with new Boral or a comparable concrete tile from GAF or CertainTeed, plus a re-evaluation of the underlayment, which often fails before the tile does. Most Boral tile roof replacements in Jacksonville are actually underlayment replacements with tile reuse, but once tiles are spalled, full replacement is the honest call.
• Boral Clay Tile – cracked barrels from foot traffic and storm debris. Clay tile is beautiful and brutally unforgiving when a branch drops or a satellite tech walks the wrong valley. Cracked Boral clay tiles are common after Jacksonville’s afternoon thunderstorms. The issue: water gets under the cracked tile and sits on the underlayment, and by the time you see a ceiling stain, the decking is already soft. On a Boral clay roof, we pull a test course before recommending repair versus full replacement. If the underlayment and decking are sound, selective tile replacement works. If not, a full replacement is the only safe answer, and we’ll show you the pulled course before we write the price.
• Boral Steel Roofing – fastener backout and oil canning on shallow pitches. Boral’s steel panels expand and contract with Jacksonville’s temperature swings, and on low-slope sections, fasteners back out over time. We see this most often on screened-in pool enclosures and flat-roof additions in Riverside and Avondale. The failure isn’t the panel itself; it’s the fastening pattern. A Boral steel replacement means we re-engineer the fastener schedule, replace degraded panel coatings, and set the roof up to handle Jacksonville’s rain without the oil-can ripple.
• Boral Composite Shake – moss and algae growth in shaded lots. Jacksonville’s humidity plus tree canopy creates algae colonies on composite shake products that look like they need a roof replacement when the structure is still sound. We service this on older homes in San Marco and Ortega, where oak canopies hold moisture against the roof for six months a year. If the composite is intact, we’ll tell you. If the shake is crumbling at the corners from UV exposure, a full Boral composite replacement with proper ventilation is the fix, and we’ll write the line item for ventilation, not just the shake.
• Boral Roof Tile Underlayment – the real failure point most homeowners miss. Every Boral tile roof is only as good as what’s underneath it. In Jacksonville, we regularly replace underlayment on Boral roofs that are 12 to 15 years old, where the tile looks fine but the felt or synthetic underlayment has degraded from trapped moisture and heat. A full Boral replacement in this scenario means the tile comes off, the decking gets inspected and replaced where needed, new underlayment goes on, and the tile goes back down. It’s a full replacement in all but name, and most homeowners don’t realize it until we show them the pulled tile and the deteriorated underlayment beneath it.

Our Boral Roof Replacement Process

Boral jobs have their own rhythm. Here’s how we run a replacement from the first call to the final clean-up photo, with Erik Lindgren walking you through each step before it happens.

1. 1
   Walk-through and measurement. Erik or a lead tech walks the roof with you, pulls a test tile or panel where warranted, and checks the decking, flashing, and ventilation. No one starts selling anything until we know what’s actually failing.
2. 2
   Parts and materials decision. For Boral replacements, we source original Boral materials where warranty coverage depends on it, and recommend quality-comparable alternatives where the original series is discontinued or carries a lead time that doesn’t work for your schedule. You get the spec sheet before the order goes in.
3. 3
   Written price. You get a line-item, dollar number before any work starts. No change orders, no “we found something while we were up there.” If a problem is hiding in the decking, we pull a section during the estimate stage so it’s in the first number, not a surprise later.
4. 4
   Tear-off and protection. Shoe covers at the door, drop cloths through the hallway, and tarps over landscaping and the pool. We coordinate door schedules with you if the dog needs to stay inside, and we use pet-safe product choices where there’s a choice. C.A.R.E. values apply the whole time: Clean up like it’s our own home, Ask before we move or touch anything, Respect the family’s time and quiet hours, Explain the price before the work.
5. 5
   Installation and testing. The new Boral roof goes on with the correct fasteners, underlayment, and flashing details for Jacksonville’s wind and rain. We run a water test on flat sections and inspect every flashing point before we call it done.
6. 6
   Clean-up photo and guarantee. Before the crew leaves, you get a photo of the completed clean-up. Every Boral replacement is covered by our 365-Day Done Right Promise: if the work isn’t right, we make it right.

What Boral Roof Replacement Costs in Jacksonville

What moves the price: roof pitch (steep roofs take longer and require safety staging), decking condition (rotted sheathing adds $75 – $110 per sheet), and whether your Boral line is still in production (discontinued series cost more to source). You’ll see your exact number in writing before any work starts, and we don’t change it once the job begins. Call (904) 604-7914 for a free estimate on your Boral roof replacement in Jacksonville.

Why Jacksonville Homeowners Call Birchbark Roofing Jacksonville for Boral Work

Boral isn’t the only roof we touch. Our crews also work with GAF, Owens Corning, and CertainTeed, so if a Boral replacement isn’t the right value for your home, we’ll tell you what is and why, with prices for both. We’re part of the Cedarwell family of roofing companies since 2000, and every Birchbark job carries the Cedarwell Care Promise: the written price, the background-checked uniformed technicians, the clean-up that gets photographed before the crew leaves, and the guarantee behind the work. Erik grew up in Los Angeles and learned roofing at Los Angeles Trade-Technical College before spending the better part of two decades on real roofs in real weather. He’s walked Boral tile, steel, and composite jobs all over Jacksonville, from Riverside to the San Marco waterfront. When you call, a live person answers 24 hours a day, 7 days a week. No voicemail trees, no next-business-day callbacks.

FAQs