Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Jacksonville?
Metal roof installation in Jacksonville typically costs between $12,500 and $28,000 for a standard single-family home, with most homeowners in neighborhoods like Mandarin, Riverside, and San Marco paying around $17,000 to $22,000 for a complete standing seam or stone-coated steel system. That works out to roughly $8.50 to $16 per square foot installed, depending on the metal profile, roof complexity, and tear-off requirements. These figures reflect Jacksonville’s 2026 market, where coastal humidity and hurricane-code fastening requirements shape both material choices and labor costs.
We know that’s a wide spread. The reason is simple: a basic corrugated panel roof over a single-story ranch in Arlington costs far less than a standing seam roof with hidden fasteners on a two-story Riverside craftsman with three dormers and a steep pitch. You’ll get a written price in dollars before any work starts, so the number you see is the number you pay.
Metal Roof Installation Cost Breakdown (2026)
Here’s what a metal roof installation in Jacksonville actually costs, line by line. These are real 2026 market ranges pulled from recent jobs across Duval County, including tear-off of the existing roof, which most Jacksonville homes need.
| Cost Component | Typical Range (Jacksonville, 2026) | What It Includes |
|---|---|---|
| Existing roof tear-off & disposal | $1,800 – $3,500 | Removal of old shingles or tile, dump fees, magnet sweep for nails |
| Decking repair or replacement | $400 – $2,200 | Replacing rotted or delaminated plywood sections, common in humid climates |
| Metal panels or shingles (materials only) | $4,200 – $9,800 | Standing seam, corrugated, or stone-coated steel from GAF, CertainTeed, or similar |
| Underlayment | $900 – $2,400 | Synthetic or high-temp peel-and-stick underlayment rated for Florida heat |
| Fasteners & flashing | $600 – $1,500 | Hurricane-rated clips, ridge caps, valley flashing, pipe boots |
| Labor & installation | $4,000 – $8,500 | Crew time, insurance, background-checked technicians, clean-up |
| Permits & inspections | $350 – $900 | City of Jacksonville permit fees, Miami-Dade/HVHZ compliance where required |
Total installed cost for most Jacksonville homes lands between $12,500 and $28,000. A simple 1,400-square-foot ranch in Oceanway with an easy 5:12 pitch might come in near the low end. A 3,200-square-foot two-story in Avondale with steep rooflines, original 1920s decking that needs full replacement, and a standing seam profile pushes toward the top.
What moves the number most? Three things: the metal profile you choose, whether your old roof comes off, and how many penetrations your roof has (chimneys, vents, skylights). Stone-coated steel products from manufacturers like Boral typically run 20 to 30 percent more than exposed-fastener panels but last 40 to 70 years in Florida’s salt air.
What Affects Metal Roof Installation Pricing in Jacksonville
Jacksonville’s market has quirks that homeowners in other cities don’t face. Here are the factors that move your price up or down, specific to this region:
- Wind-load requirements. Jacksonville sits in a high-velocity hurricane zone. Fasteners, clips, and panel gauges must meet Miami-Dade or Florida Building Code standards. That adds $800 to $1,800 compared to inland installs, but it’s not a corner you want cut.
- Roof complexity and pitch. Steep roofs on Riverside and Avondale historic homes require more safety equipment, slower work, and specialized flashing. A 12:12 pitch adds 15 to 25 percent to the labor line.
- Existing roof condition. Many mid-century homes in Arlington and San Jose still have their original decking. If we find rot when the old shingles come off (and in Florida humidity, we often do), deck replacement runs $65 to $95 per 4×8 sheet.
- Metal profile and gauge. Exposed-fastener corrugated panels are the most affordable. Standing seam with hidden fasteners costs more but eliminates exposed screws that can back out over decades of Florida sun and rain. Stone-coated steel adds durability and the look of tile or shingle.
- Coastal proximity. Homes within a few miles of the Atlantic or the St. Johns River need aluminum or galvanized steel with extra corrosion protection. You’ll see about $500 to $1,200 added for coastal-rated materials on beachside properties.
- Seasonality. Jacksonville’s roofing season runs hard from March through September. Booking an install in the slower winter months can sometimes save you $500 to $1,500, though our written pricing means you’ll always know your number before committing.
Metal Roof Types and Their Jacksonville Price Points
Not all metal roofs are the same product, and the price difference between them is significant. Here’s what each option typically costs in Jacksonville, installed:
- Exposed-fastener corrugated panels: $8.50 – $12 per square foot. The workhorse of the metal roofing world. Panels screw directly to the deck with visible fasteners. Reliable, but the screws need re-tightening over time as Florida’s temperature swings make materials expand and contract.
- Standing seam (hidden fastener): $11 – $16 per square foot. Raised ribs with concealed clips that allow the metal to move freely with temperature changes. Popular in Mandarin and Julington Creek where homeowners want a cleaner look and fewer maintenance points.
- Stone-coated steel: $13 – $18 per square foot. Steel panels coated with stone granules, shaped to look like shingles, tile, or shake. Products from Boral and similar brands handle hail well and come with 50-year material warranties.
- Aluminum (coastal-rated): $12 – $17 per square foot. Best for homes right on the water where salt spray eats regular steel. Lighter than steel, naturally corrosion-resistant, and a smart choice in Atlantic Beach, Neptune Beach, and Mayport.
When you call us for a metal roof installation in Jacksonville, we walk through these options with you at your kitchen table, not over a rushed phone call. You’ll see line-by-line pricing for each profile and make your decision with the facts in front of you.
Metal vs. Asphalt Shingles: A Jacksonville Cost Reality Check
Metal runs two to three times the upfront cost of architectural asphalt shingles, which sit around $5 to $7 per square foot installed in Jacksonville. But the long-term math is different. A metal roof in Florida’s climate typically lasts 40 to 70 years, while asphalt shingles in Jacksonville’s heat and humidity usually need replacement in 15 to 20 years.
Over a 50-year window, the metal roof costs less per year, even before you account for insurance savings. Many Jacksonville homeowners see lower wind mitigation credits and insurance premiums after switching to a metal roof, though every policy is different and we recommend checking with your carrier. What we can tell you: metal doesn’t absorb heat the way asphalt does, and in a city where summer attic temperatures hit 140 degrees, that matters for your energy bill.
How to Save on Metal Roof Installation
Metal roofing is a significant investment, and there are legitimate ways to bring your number down without compromising the roof:
- Choose exposed-fastener panels if your budget is tight. You sacrifice some long-term maintenance convenience but save $3,000 to $8,000 on a typical home.
- Install in the off-season. Jacksonville’s winter months are slower for roofing companies. You may get better crew availability and occasionally better pricing.
- Check for insurance credits and rebates. Some Florida insurers offer wind mitigation discounts for metal roofs. Ask your agent before you finalize your budget.
- Bundle with gutter replacement. If your gutters are aging, doing both jobs at once saves on mobilization and disposal fees.
- Get a written estimate and compare the actual numbers. Not a ballpark, not a “somewhere around” figure. A written dollar amount with line items. That’s what we provide on every visit, at no cost.
For a free estimate on your specific roof, call (904) 604-7914. Someone answers, 24 hours a day, 7 days a week. No voicemail trees.
What to Expect During Metal Roof Installation in Jacksonville
Here’s how it works when Birchbark Roofing Jacksonville handles your metal roof. This is the process we follow on every job, and we write it down so you know exactly what happens before anyone climbs a ladder.
- In-home estimate. Erick Lindgren or one of our senior estimators walks your property, takes measurements, checks the decking, and discusses metal profiles with you. You get a written price before we leave, always, with no pressure and no “today only” discount games.
- Material ordering. Once you approve the written estimate, we order your metal panels, underlayment, and fasteners. Lead time in Jacksonville is typically 2 to 4 weeks depending on the manufacturer and profile.
- Tear-off. The crew arrives with shoe covers for every technician and drop cloths through the work path inside your home. Old roofing comes off, goes directly into a trailer, and the yard gets a magnet sweep before we move on.
- Deck inspection and repair. We check every sheet of plywood and replace anything that’s soft, delaminated, or water-damaged. You’ll see the damage with your own eyes before we cover it, and the cost is already in your written estimate if we flagged it during the initial inspection.
- Installation. Underlayment goes down first, then the metal panels, flashing, and ridge caps. Every fastener is checked against Florida wind-load requirements.
- Clean-up and photo proof. Before the crew leaves, we photograph the completed clean-up and share it with you. The yard is magnet-swept, the driveway is clear, and the only thing left is a new metal roof. That’s the Cedarwell Care Promise: clean up like it’s our own home, ask before we move or touch anything, respect your family’s time, and explain the price before the work.
If your kids are home during the install, we coordinate the door schedule so there’s no surprise foot traffic through the playroom. If your dog needs to stay inside, we keep the gates and doors closed between trips to the truck. These are small things, but they’re the difference between a crew that treats your home like a job site and one that treats it like a home.
Jacksonville-Specific Considerations for Metal Roofs
Jacksonville isn’t just any Florida market. Here are the local realities that affect your roof’s performance and price:
Hurricane season. From June through November, Jacksonville sits in the crosshairs. Metal roofs rated for 150+ mph winds cost more than standard systems, but they’re the last roof you’ll ever buy. After Hurricane Irma in 2017 peeled asphalt shingles off thousands of Duval County homes, standing seam and stone-coated steel roofs held up measurably better. The fastening system is simply stronger.
Salt air in coastal neighborhoods. If you live east of the Intracoastal in Atlantic Beach, Neptune Beach, Jacksonville Beach, or Mayport, the salt spray is a daily reality. Standard galvanized steel will eventually corrode. We recommend aluminum or stone-coated steel with coastal-rated fasteners for homes within a mile of the ocean. The extra cost is about 10 to 15 percent, and it’s the difference between a roof that lasts 25 years and one that lasts 50.
Summer attic heat. Jacksonville’s summer runs from May through October, with attic temperatures routinely exceeding 130 degrees. Metal reflects radiant heat better than asphalt, and when paired with proper ridge ventilation, it can lower your cooling load. Some homeowners in Riverside and Springfield report 10 to 15 percent lower summer energy bills after switching to metal, though your results depend on insulation and tree coverage.
Historic district rules. Riverside Avondale and Springfield have historic preservation guidelines that may restrict roof material or color choices. Before you fall in love with a particular metal profile, check with the Jacksonville Historic Preservation Commission if your home is in a designated district. We handle the paperwork questions regularly and can tell you what’s been approved in similar homes nearby.
Is It Cheaper to Repair or Replace a Metal Roof in Jacksonville?
If your existing metal roof is under 20 years old and the issue is isolated (a few loose panels, a leaking pipe boot, rust spots around fasteners), repair almost always makes more financial sense. Repairs in Jacksonville typically run $350 to $1,800 depending on scope, while full replacement costs what we outlined above. If your roof is 30+ years old and showing rust across multiple panels, the repair math stops making sense. We’ll tell you straight which side of that line you’re on.
FAQ: Metal Roof Installation Cost in Jacksonville
How much is a metal roof for a 2,000 sq ft house in Jacksonville?
For a 2,000-square-foot home in Jacksonville, expect to pay between $17,000 and $32,000 for a complete metal roof installation including tear-off of the old roof. A basic exposed-fastener system runs about $17,000 to $21,000, while a standing seam roof with hidden fasteners runs $22,000 to $32,000. Your exact price depends on roof pitch, decking condition, and penetrations. Call (904) 604-7914 for a written estimate on your specific home.
Are metal roofs worth the cost in Florida?
In Jacksonville specifically, most homeowners find metal roofs worth the investment when they plan to stay in the home for more than 10 years. The upfront cost of $12,500 to $28,000 beats the long-term math of two or three asphalt replacements over the same 50-year window, plus you’ll likely see insurance wind mitigation credits. Metal also handles Florida’s heat and hurricane winds better than any other common roofing material.
How long does a metal roof last in Jacksonville’s climate?
A correctly installed metal roof in Jacksonville lasts 40 to 70 years, which is 2 to 3 times longer than architectural asphalt shingles in the same climate. Standing seam and stone-coated steel hold up best against Florida’s rain, humidity, and UV exposure. The limiting factor is usually the fasteners and underlayment, not the metal itself. Our 365-Day Done Right Promise covers the installation; manufacturer warranties from GAF, CertainTeed, and Boral cover the materials for 40 to 50 years or more.
Do I need a permit for metal roof installation in Jacksonville?
Yes. The City of Jacksonville requires a building permit for roof replacement, and the work must pass inspection against Florida Building Code wind-load requirements. Permit fees typically run $350 to $900 and are included in our written estimate. We handle the permit application and scheduling on your behalf.
Can I install a metal roof over my existing shingles?
Technically yes in some cases, but we don’t recommend it in Jacksonville. The city’s humidity accelerates rust and rot in trapped moisture between the old shingles and the new metal. Tear-off adds $1,800 to $3,500 to the project, but it lets us inspect the decking and install a clean underlayment system. You’ll get a longer-lasting roof that doesn’t hide problems under the surface.
How much does it cost to switch from shingles to metal in Jacksonville?
Switching from asphalt shingles to metal in Jacksonville costs $12,500 to $28,000 for a standard home, including shingle tear-off, decking repair, new underlayment, metal panels, flashing, and labor. The metal profile is the biggest variable: corrugated panels start near the low end, standing seam runs mid-range, and stone-coated steel sits at the top. Call (904) 604-7914 for a free, written quote on your home.
Key Takeaways
- Metal roof installation in Jacksonville costs $12,500 to $28,000 for most single-family homes in 2026, or $8.50 to $16 per square foot.
- Standing seam and stone-coated steel cost more upfront but last 40 to 70 years with minimal maintenance.
- Hurricane wind-load requirements, coastal salt air, and Florida’s year-round humidity all affect your specific price.
- You should always get a written price in dollars before work starts. No verbal estimates, no surprises.
- Permits are required in Jacksonville. A good roofing company handles them for you.
- Free estimates are available by calling (904) 604-7914, and a live person answers 24/7.
Whether you’re in Mandarin, Riverside, San Marco, Arlington, or out toward the beaches, we’ll walk your roof with you and talk honestly about what it needs. No pressure, no inflated urgency, no “sign today” discounts. You’ll get a written price, a plan we explain step by step, and a crew that treats your home the way we’d want ours treated. Shoe covers at the door, drop cloths through the hallway, all debris cleared and photographed before we leave.
Ready to know your number? Call (904) 604-7914 today. We’ll schedule your free estimate and give you a written price you can actually plan around.
Pricing reflects the Jacksonville market as of 2026. Birchbark Roofing Jacksonville offers free estimates – call (904) 604-7914.
Written by Erik Lindgren, Owner at Birchbark Roofing Jacksonville, serving Jacksonville since 2000.
What Our Customers Say
"New roof after hail. They covered everything below, kept the site neat each day, and did a full nail sweep of the whole yard twice. Thoughtful people."
- Caroline Prejean"After a storm we had a few spots to fix. They were gentle around the garden, laid tarps, and swept the driveway spotless. You'd never know a roof crew had been here."
- Dawn Kirkland"Full replacement. They protected the landscaping and the patio furniture before they started tearing off. Finished when they said and the yard was cleaner after than before."
- Reba Santoyo